Find great deals on eBay for fishman classic 4 and fishman pickup. Shop with confidence. Your fishman classic 4, results provided by Musician's Friend.

Not sure my pickup is a 4T but it is marked as a Fishman Classic 4 on the face, its on my Fender Bass Guitar. With a known fully charged battery, installed properly, and with known good 1/4 cable, with a known good amplifier, I still get no output from the pickup. I notice when I install the battery, the red indicator light lights up, then goes out, (less than 1 second). I removed the 4 screws at the EQ and 3 screws at the 1/4 cable input and visually verified all solder connections and grounds were in tact. I do not have access to any other electrical testing at this point.

Thought maybe there is a quick fix someone might know out there. Thanks in advance. Vdo Dayton Supercoder Keygen Free.

Taylor make a factory solution for this issue- you basically need a metal strip located where the ball ends of the strings anchor, and a wire running from that to the ground on the output jack. The Taylor piece is about 25.00, but is only good for pins that are in a straight line, not the 'vee' shape of some of the Stratacoustics. I have made my own version through the years, using thin piece of metal, holes drilled to match the alignment of the bridge pin holes, held inside in line with the bridge pin holes by two-faced carpet tape (the thin kind).with a wire soldered to it that is then run to the ground tab on the output jack.

Then any time you touch the strings, you ground the guitar. This is usually a problem caused by the ground attachment on the under-saddle pickup, btw, right where the wire joins the pickup under the saddle. Sep 02, 2013 .