Ckz Time Clock Crack Cocaine. • www.proform.com USERʼS MANUAL Model No. PFTL79510.0 Serial No.

Learn more about the Mintek DTV-265-D before. Up for auction is one brand new mintek initial remote control for lcd tv dvd combo. Model # rc-600, rc-600b, rc.

Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CON- TACT THE STORE; please contact Customer Care. • TABLE OF CONTENTS WARNING DECAL PLACEMENT...2 IMPORTANT PRECAUTIONS.

• IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. DANGER: the power cord, and press the power switch into the off position when the treadmill is not Always unplug the power in use. • Thank you for selecting the revolutionary PROFORM ing this manual, please see the front cover of this man- ® PERFORMANCE 600 treadmill.

The PERFORMANCE ual. To help us assist you, please note the product 600 treadmill offers an impressive selection of features model number and serial number before contacting us. • ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons.

Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. Make sure that the power cord is unplugged. Place a piece of cardboard below the rear of the Frame (56) to protect the floor or carpet. Attach the Left Wheel Cap (96) to the Base (94) with two #8 x 3/4' Screws (2).

Attach the Right Wheel Cap (not shown) to the right side of the Base (94) in the same way. Free Form 1096 Template 2015. Hold the Left Upright (89) against the Base (94). Be careful not to pinch the Upright Wire (81).

Insert two 3/8' x 1 1/4' Bolts (8) with two 3/8' Star Washers (13) and two 3/8' x 2 3/4' Bolts (7) into the Left Upright. Partially tighten the 3/8'. Cut the plastic tie in the Left Handrail (88) and the Right Handrail (not shown). If necessary, press the 5/16' Cage Nuts (31) back into place.

Identify the Left Handrail (88) and hold it near the Left Upright (89). Insert the Upright Wire (81) through the bracket on the bottom of the Left Handrail. Set the console assembly face down on a soft surface to avoid scratching the console assem- Console bly. Remove the two Screws (A). Next, lift off the Assembly Crossbar (93). Discard the two Screws. IMPORTANT: To avoid damaging the Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4'.

Set the console assembly on the Left Handrail (88) and the Right Handrail (87). Be careful not Console to pinch any wires.

Insert the excess Upright Assembly Wire (not shown) into the Left Handrail. Attach the console assembly with six #8 x 1/2' Screws (1) and four 1/4'. Hold the Left Upright Cover (79) against the console assembly. Align the holes in the Left Upright Cover with the holes in the Left Upright (89). Attach the Left Upright Cover with three #8 x 1/2' Screws (1). Attach the Right Upright Cover (80) to the Right Upright (90) in the same way. Make sure that there is a piece of cardboard below the rear of the Frame (56).

See page 15 and plug in the power cord. Next, see page 17 and turn on the power.

The incline system will automatically calibrate and the Frame (56) will move upward and downward. Attach the Rear Feet (57) to the Frame (56) as shown with four #8 x 3/4' Screws (2). Discard the piece of cardboard. Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 25).

• OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT that is properly installed and grounded in accor- dance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- GFCI-equipped outlets. • CONSOLE DIAGRAM FEATURES OF THE CONSOLE out goals, compete against friends, and much more. To purchase a Nike+ module at any time, call the telephone number on the front cover of this The treadmill console offers an impressive array of manual. • HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console.